AnthonyLMBD

Hey guys I just ordered a set of wiseco pro true dome pistons for a standard 364cu Lq4. Along with ls3 heads what kind of compression am I looking at?

So far here is my build

Pro true 4cc domes
823 heads
750 holly hp
Super Victor Intake
1 7/8 sw headers
Arp head / main / rods
Looking at cams

Everything else mainly stock. This is for a small 02 Sonoma. Would I be able to spray this motor? If so, how much? Thank you!

JTP4020

What's done to the heads, have they been milled?

AnthonyLMBD

Nothing but a little porting.

64post

iTrader: (5)

You'll need to know a lot more, like what head gasket you're going to use, bore x thickness and if those pistons are in or out of the hole and by how much. Then after your heads are completed, milled and assembled, you'll need to cc them. Sorry no easy answer here, do your research. Here's a good place to get your answer when you get all your data.

https://www.uempistons.com/index.php...de77045375e163

AnthonyLMBD

My heads are done just mild ported 823s. Standard 4.000 bore 3.622 stroke. +4cc dome I think it was. Just want a rough estimate. Thank you

farmington

iTrader: (14)

contact Weisco. they will be able to get you in the ballpark