PCV mod
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: Dallas
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
PCV mod
hey everyone,
I was just about to change out my PCV valve and i wanted to see if there were any other options. I just found this: http://www.fbody.com/members/stevenm...ML/pcv_mod.htm Has anybody tried this. I am going to go and buy the rest of the parts tomorrow and install it.
It seems to be a much more inexpensive possibility compared to AMW's catchcan, yet it doesnt look as good. But i think if it was all spray painted, then it wouldnt even be noticed by the average consumer with all the other wires and hoses that are under the hood.
thanks
I was just about to change out my PCV valve and i wanted to see if there were any other options. I just found this: http://www.fbody.com/members/stevenm...ML/pcv_mod.htm Has anybody tried this. I am going to go and buy the rest of the parts tomorrow and install it.
It seems to be a much more inexpensive possibility compared to AMW's catchcan, yet it doesnt look as good. But i think if it was all spray painted, then it wouldnt even be noticed by the average consumer with all the other wires and hoses that are under the hood.
thanks
#2
TECH Apprentice
iTrader: (3)
Join Date: Aug 2004
Location: Largo, Fl.
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
the article said you should change the filters every oil change. That seems like a pain. I wonder how well the ls6 pcv system works. It can be converted for around 65 dollars.
http://www.ls1howto.com/index.php?ar...1a5dc01eeaec60
http://www.ls1howto.com/index.php?ar...1a5dc01eeaec60