P/V clearance opinions
03-31-2003, 06:33 PM
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Nov 2002
Location: Venice, Ca
Posts: 1,829
Likes: 0
Received 0 Likes
on
0 Posts
P/V clearance opinions 6.0 L block with 0 deg above deck, 5.3 L heads with 2.055 intake valve, and a huge 19 cc dish for the pistons. Heads were milled .030 over with 57 cc chambers. Cam is a 242/242 .595 .595 112 LSA lunati grind. I am using cometic .043 gaskets. I am going to clay one of the pistons but was just looking for a concensues beforehand.
