davered00ss

iTrader: (4)

I see a lot of these heads for sale cheap. What's the deal? Are they good heads? Some say milled .30? Any info would be helpful.

I'm looking at a small cam MTI stealth 1. Would these be good heads?

AZ Power & Sound

iTrader: (2)

ive seen two sets come through my shop... both were beautiful! Only downside I guess is trying to get ahold of Jay!

Gloveperson

iTrader: (9)

Those heads should work very well with the MTI stealth cam. My only advice would get the 2nd generation stealth cam. I called the guys at MTI looking at that cam and I asked them the differences betweeen the two since they are almost identical and the sales men (don't remember his name) basically said that the Stealth II was just a newer version of it.

-Todd

Country Boy

iTrader: (24)

Im thinking about selling mine.....

LSUxBlake

iTrader: (3)

I just bought a used set not too long ago, had them flowed on Thunder's bench, and they flowed right as they were advertised, peak at about 306 cfm with some good mid-range numbers. But buy them used if you can get your hands on a set, because they sure seem difficult to get new.

davered00ss

iTrader: (4)

I have seen 2 sets recently for $700.

30th t/a

iTrader: (51)

i like them. im going to be selling my stage 2's because im upgrading to the stage 2.5's.

2000Blackout

iTrader: (1)

hmmm whos could that be.I dont have 5.3's but 6.0L's,as Mike said beautiful.I gained 32rwhp with them.That is untuned with a rich 11.7 A/F and 24 degrees timing. Looking for a good 10-15 more after tune and more timing.