Help with LS1 identification
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jun 2004
Location: SF Bay Area
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Help with LS1 identification
Hello,
I recently purchased an LS1 takeout. The seller claimed that the engine was from a 2001 F-Body. However, the engine has an EGR valve. I have read in the FAQ that 01-02 motors did not have an EGR valve. Is this always true? Is there any way (externally) for me to verify that the motor is indeed a 2001? Please help,
-ch
I recently purchased an LS1 takeout. The seller claimed that the engine was from a 2001 F-Body. However, the engine has an EGR valve. I have read in the FAQ that 01-02 motors did not have an EGR valve. Is this always true? Is there any way (externally) for me to verify that the motor is indeed a 2001? Please help,
-ch
#2
Originally Posted by hyperion
Hello,
I recently purchased an LS1 takeout. The seller claimed that the engine was from a 2001 F-Body. However, the engine has an EGR valve. I have read in the FAQ that 01-02 motors did not have an EGR valve. Is this always true? Is there any way (externally) for me to verify that the motor is indeed a 2001? Please help,
-ch
I recently purchased an LS1 takeout. The seller claimed that the engine was from a 2001 F-Body. However, the engine has an EGR valve. I have read in the FAQ that 01-02 motors did not have an EGR valve. Is this always true? Is there any way (externally) for me to verify that the motor is indeed a 2001? Please help,
-ch
https://ls1tech.com/forums/generation-iii-internal-engine/231525-ls1-identity.html Check out this thread.
#4
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jun 2004
Location: SF Bay Area
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
I still need help! My motor doesn't have the casting mark shown in the picture below, so I still don't know what year the motor is. The casting has the boss show below the '10mm' below, but it is blank.
Here is all the info I could retrieve:
Block casting number: 12559378
Sticker on back of head: 10YHB K010710231
Head casting number: 241
Intake injection number: 12561184 (LS6, I believe)
According to this thread:
https://ls1tech.com/forums/showpost....2&postcount=41
the 241 casting is for 01-03. But my engine had EGR on it which according to this post:
https://ls1tech.com/forums/showpost....81&postcount=3
was discontinued in 2001. ARGH!
-ch
I still need help! My motor doesn't have the casting mark shown in the picture below, so I still don't know what year the motor is. The casting has the boss show below the '10mm' below, but it is blank.
Here is all the info I could retrieve:
Block casting number: 12559378
Sticker on back of head: 10YHB K010710231
Head casting number: 241
Intake injection number: 12561184 (LS6, I believe)
According to this thread:
https://ls1tech.com/forums/showpost....2&postcount=41
the 241 casting is for 01-03. But my engine had EGR on it which according to this post:
https://ls1tech.com/forums/showpost....81&postcount=3
was discontinued in 2001. ARGH!
-ch
Last edited by hyperion; 11-16-2004 at 11:49 PM.
#6
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jun 2004
Location: SF Bay Area
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Can you tell me what source you used for that casting number? I'd just like to verify that it's really a 2000 block before I do anything else. I'm really confused because it's (apparently) got an LS6 intake which is supposedly a 2001+ change.
-ch
-ch
#7
TECH Fanatic
iTrader: (3)
Join Date: Nov 2001
Location: Wichita Falls,TX
Posts: 1,032
Likes: 0
Received 0 Likes
on
0 Posts
Actually it was used starting in mid 99 and into early 2001 when 12561168 replaced it. It's primary useage was in 2000 but carried into 2001 so finding one with a LS6 intake is entirely possible. It was used in both Corvettes and F-bodies. There are several sources such as:
1.http://www.mortec.com/castnum.htm
2.http://www.racecheep.com/Castings.html
3.http://ss-firstgeneration.hp.infosee.../materials.htm
My actual source was my hand written reference notes that I have taken since 1999.
1.http://www.mortec.com/castnum.htm
2.http://www.racecheep.com/Castings.html
3.http://ss-firstgeneration.hp.infosee.../materials.htm
My actual source was my hand written reference notes that I have taken since 1999.
Last edited by Gold Z; 11-18-2004 at 12:30 AM.