Pushrod Galleries
12-19-2004, 06:32 PM
#1
Teching In
Thread Starter
Join Date: Dec 2004
Location: Calgary, Alberta Canada
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Pushrod Galleries Hello everybody,
I am a newbie to this forum, so please forgive me if this question has been asked many times before.
I am wondering if it is necessary to elongate the pushrod gallery holes on a stock LS1 head when installing a set of Com DRE shaft mount rockers.
The rockers are 1.8's instead of the standard 1.7's.
Any replies, advice, or recommendations are greatly appreciated.
Thanks!
I am a newbie to this forum, so please forgive me if this question has been asked many times before.
I am wondering if it is necessary to elongate the pushrod gallery holes on a stock LS1 head when installing a set of Com DRE shaft mount rockers.
The rockers are 1.8's instead of the standard 1.7's.
Any replies, advice, or recommendations are greatly appreciated.
Thanks!
12-20-2004, 10:23 AM
#4
Yes. All shaft mounted rockers require to elongate the holes and use a way shorter pushrod. Probably a 7.050" or so. Shaft mounted rockers for any motor are not a drop in replacement.
12-20-2004, 03:39 PM
#6
11 Second Club
Join Date: Feb 2002
Location: Norcal
Posts: 639
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Unaffiliated Racing
Yes. All shaft mounted rockers require to elongate the holes and use a way shorter pushrod. Probably a 7.050" or so. Shaft mounted rockers for any motor are not a drop in replacement.
Do you mean all Adjustable Shaft mounted rockers?
