Cranks interchangable?
01-16-2005, 02:48 PM
#2
TECH Fanatic
iTrader: (1)
Join Date: May 2003
Location: St Clairsville, Oh
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
Um that would be the stock stroke. 3.633. Yes it will but it will cost you more in the long run.
The ls1 crank is lighter than the 6.0. This mean at the mechine shop they will have to add more weight. AKA more money.
The ls1 crank is lighter than the 6.0. This mean at the mechine shop they will have to add more weight. AKA more money.
01-16-2005, 03:31 PM
#3
Teching In
Thread Starter
Join Date: Sep 2004
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
which companies make stroker cranks for the 6.0 is more what i mean is it the same as the LS1 crank and up to what stroke can you get. all i find LS1 and LS6 specific cranks, no 6.0.
are they the same
are they the same
01-16-2005, 03:33 PM
#4
8 Second Club
iTrader: (76)
Join Date: Jun 2004
Location: Goshen NY
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Boomhauer
which companies make stroker cranks for the 6.0 is more what i mean is it the same as the LS1 crank and up to what stroke can you get. all i find LS1 and LS6 specific cranks, no 6.0.
are they the same
are they the same
01-16-2005, 03:44 PM
#5
TECH Fanatic
iTrader: (1)
Join Date: May 2003
Location: St Clairsville, Oh
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
If it is a Gen III crank it work with all GenIII motor. The 4" crank for the ls1/6 is the same one that will go in a LQ4/9. Call Thunder racing or TSP or any of the other sponcers and they will get u what u need.