Clearance Question
#1
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Sep 2004
Location: Kalifornia
Posts: 1,138
Likes: 0
Received 0 Likes
on
0 Posts
Clearance Question
Does anybody know the Piston to Valve Clearance on an Ls1 Assuming the Pistons are .025 out of the hole. Whats the MAx Lift before you put the valve through the piston?
#2
TECH Fanatic
iTrader: (1)
Join Date: May 2003
Location: St Clairsville, Oh
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
It is not lift that will put the valve thought the piston it is the deration an some lift. If i could run a 3in lift on a cam with a stock deration it would work because the vavle would close before the piston was ever there. It also has to do with lobes. IF it is on an XE or XER will make a dif.
What kind of cam do you want to run. I am sure we can look at the specs and say ya or na.
What kind of cam do you want to run. I am sure we can look at the specs and say ya or na.