Um yea....really need some help!
01-29-2005, 11:42 AM
#1
Staging Lane
Thread Starter
Join Date: Jun 2004
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Um yea....really need some help! I installed a double rollmaster timing chain, with the shims needed. Put on the oil pump but the front timing cover wont allow me to fit it all the way back. Its like the oil pump is hitting the cover, i cant get it to seal. I thought there's no need for fabing, whats wrong? its like an 1/16th gap!
01-29-2005, 01:17 PM
#2
Banned
iTrader: (1)
Join Date: Nov 2004
Location: North of Seattle
Posts: 2,057
Likes: 0
Received 0 Likes
on
0 Posts
did you put the driver side shim on backwards? It should point towards the center of the motor like this < not like this > when you're looking at it.
Hope this helps.
Nate
Hope this helps.
Nate
01-29-2005, 01:23 PM
#3
TECH Fanatic
iTrader: (1)
Join Date: Jul 2004
Location: Palm Harbor, FL
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
it didnt work for me the first time either, you have to use the old crank sprocket thing and a rubber mallet to hit it on all the way. if that makes sense...