Hotcam?
#2
11 Second Club
iTrader: (46)
Join Date: Feb 2004
Location: jacksonville, fl
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
you need to do a search, there is a four page discussion about this cam on the second or third page.
but yes it will work, how well will you like it, i dont know? you could get by, but it will be so much better after you get it tuned!
but yes it will work, how well will you like it, i dont know? you could get by, but it will be so much better after you get it tuned!
#4
TECH Fanatic
iTrader: (3)
Join Date: Jun 2004
Location: Baton Rouge, LA
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98Z28MrO
I was wondering if i'd be alright on a stock tune with a hotcam. 2001 A4.
The hotcam is one of the only cams in that size area you wont be "alright" with on stock tune.
#6
Originally Posted by 98Z28MrO
I was wondering if i'd be alright on a stock tune with a hotcam. 2001 A4.
Trending Topics
#8
Originally Posted by crow@sdpc
The Hotcam is a good choice in a stock tune situation,you should be fine! If you want more there is a ton of choices out there and lots of opinions,one that we sell alot of besides the Hotcam is the ZO6 CAMSHAFT!You would need a tune for that one and other mod's,but worth it!
#9
TECH Fanatic
iTrader: (3)
Join Date: Jun 2004
Location: Baton Rouge, LA
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by crow@sdpc
The Hotcam is a good choice in a stock tune situation,you should be fine! If you want more there is a ton of choices out there and lots of opinions,one that we sell alot of besides the Hotcam is the ZO6 CAMSHAFT!You would need a tune for that one and other mod's,but worth it!
#11
11 Second Club
iTrader: (46)
Join Date: Feb 2004
Location: jacksonville, fl
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
just get a mail order tune, i bought my hotcam, and computer from two different people. the computer was already tuned and i must say it runs great! no stallin or studdering or anything
#12
SN95 Director
iTrader: (16)
Originally Posted by RevGTO
Another hotcam thread? A subject that LS1techies never seem to tire of ... gotta love it. Let the battle begin ... again ...
you need a tune, HC i installed for a local guy would barely run and stay idling. in gear idle w/ the a4 is like 550rpm, m6 is 750.
#14
Originally Posted by LSUxBlake
The Z06 camshaft is MUCH milder than the Hotam. Why would he need a tune for the Z06 but be ok with the Hotcam?
We understand that valve lift is not the key,as where i goofed in my reply,duration is it!