Cam Motion selection help please
02-01-2005, 11:58 PM
#1
Restricted User
Thread Starter
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Cam Motion selection help please Ok, going through Cam Motion, entered the following:
2000 LS1 Hyd Roller, 347ci, 5.3L heads flowing:
133 108
194 147
242 183
274 205
296 220
about 210cc intake, 2.02/1.60 valves
11:1 cr, 1.7 ratio rockers
3300 race weight, 3800-4400stall (need some help here too), 3.23 gears (forgot to update for pending new 9" with 3.90 gears), 26" slick and spraying 200-300 shot of nitrous.
Cam recommendation came back as:
X2182-2291-114+4
226/236
.574/.600
114*LSA
110*ICL
Which looks rather small, maybe its because I forgot to enter the future gearing, or the desired power range? Currently I have the TSP 231/237 .598/.595 112*LSA. Any comparison on the two? I was looking at the Texas Giant from TSP, just a tad bigger ya know
Any info is appreciated, thanks.
Charlie
2000 LS1 Hyd Roller, 347ci, 5.3L heads flowing:
133 108
194 147
242 183
274 205
296 220
about 210cc intake, 2.02/1.60 valves
11:1 cr, 1.7 ratio rockers
3300 race weight, 3800-4400stall (need some help here too), 3.23 gears (forgot to update for pending new 9" with 3.90 gears), 26" slick and spraying 200-300 shot of nitrous.
Cam recommendation came back as:
X2182-2291-114+4
226/236
.574/.600
114*LSA
110*ICL
Which looks rather small, maybe its because I forgot to enter the future gearing, or the desired power range? Currently I have the TSP 231/237 .598/.595 112*LSA. Any comparison on the two? I was looking at the Texas Giant from TSP, just a tad bigger ya know
Any info is appreciated, thanks.
Charlie
