Looking to move some high performance parts
03-18-2005, 07:57 AM
#1
Looking to move some high performance parts Going to a twin turbo setup in C5 vette. Research says I need to change heads and pistons and multiple other parts. All parts have 20 miles on them.
Let me know if anyone is interested....make me an offer......
Here is what I PAID for things.
AFR cnc'd by ET Heads 3600.00 (+250.00 for port matching) flowing 347cfm@.650, 66cc chambers. VERY nice pieces
Jesel Mohawk 1.8 adjustable rockers 1200.00
FAST 90mm Intake 850.00
Kooks 1 7/8 SS headers 875.00
Kooks 3" X-pipe 300.00
Diamond custom pistons 835.00
Darton block: new GM 2004 3,130.00
Callies Magnum 4" crank 1,825.00
LS 6 / SLP billet oilpump and timing chain 339.00
Halltech intake and ram air tunnel 600.00
ASP underdrive pulley/balancer 250.00
ATI underdrive pulley/balancer keyed 480.00
FMS hydraulic custom cam 250/257 .660/.680 113 399.00
Lifters 165.00
40lb Accel injectors 419.00
Evans high flow water pump for evans cooling 469.00
Hypertech thermostat 70.00
Jesel push rods 160.00
Extra Trend 7.250 push rods NEW 100.00
New Cometic MLS head gasket made for Darton sleeved block 167.00 per set...have two sets...one unused.
Also have.......
stock long block with original 39,000 miles (mint)...asking 2000.00 obo
C5 corvette torque tube assembly (39,000 miles) mint. Bought a new on from GM at the recommendation of forum menbers..come to find out the only upgarde is the diameter of the driveshaft...bolts are still 10mm. Unit is for automatic. GM will not take return...asking 500.00. New 1200.00
Corvette radiator...asking 100.00
GM starter: asking 150.00
stock headers ...asking 100.00
1998 chrome rims...asking 400.00 for set
Stock GM water pump asking 150.00
Stock injectors asking 150.00
all used parts with 39,000 miles and mint.
Just listing a bunch of parts. It may be easier to sell some items as assemblies..like short block or heads or long block or entire engine.
Sure wish I knew I wanted a turbo setup before I built this setup. All parts have 20 miles on them(if that).
Let me know if anyone is interested....above prices dont include the tax I paid...
I have receipts and spec / flow sheets for everything.
PLEASE EMAIL ME ...... tmo26@aol.com
Tom Ulrich
Let me know if anyone is interested....make me an offer......
Here is what I PAID for things.
AFR cnc'd by ET Heads 3600.00 (+250.00 for port matching) flowing 347cfm@.650, 66cc chambers. VERY nice pieces
Jesel Mohawk 1.8 adjustable rockers 1200.00
FAST 90mm Intake 850.00
Kooks 1 7/8 SS headers 875.00
Kooks 3" X-pipe 300.00
Diamond custom pistons 835.00
Darton block: new GM 2004 3,130.00
Callies Magnum 4" crank 1,825.00
LS 6 / SLP billet oilpump and timing chain 339.00
Halltech intake and ram air tunnel 600.00
ASP underdrive pulley/balancer 250.00
ATI underdrive pulley/balancer keyed 480.00
FMS hydraulic custom cam 250/257 .660/.680 113 399.00
Lifters 165.00
40lb Accel injectors 419.00
Evans high flow water pump for evans cooling 469.00
Hypertech thermostat 70.00
Jesel push rods 160.00
Extra Trend 7.250 push rods NEW 100.00
New Cometic MLS head gasket made for Darton sleeved block 167.00 per set...have two sets...one unused.
Also have.......
stock long block with original 39,000 miles (mint)...asking 2000.00 obo
C5 corvette torque tube assembly (39,000 miles) mint. Bought a new on from GM at the recommendation of forum menbers..come to find out the only upgarde is the diameter of the driveshaft...bolts are still 10mm. Unit is for automatic. GM will not take return...asking 500.00. New 1200.00
Corvette radiator...asking 100.00
GM starter: asking 150.00
stock headers ...asking 100.00
1998 chrome rims...asking 400.00 for set
Stock GM water pump asking 150.00
Stock injectors asking 150.00
all used parts with 39,000 miles and mint.
Just listing a bunch of parts. It may be easier to sell some items as assemblies..like short block or heads or long block or entire engine.
Sure wish I knew I wanted a turbo setup before I built this setup. All parts have 20 miles on them(if that).
Let me know if anyone is interested....above prices dont include the tax I paid...
I have receipts and spec / flow sheets for everything.
PLEASE EMAIL ME ...... tmo26@aol.com
Tom Ulrich
03-18-2005, 10:13 AM
#3
TECH Fanatic
iTrader: (1)
Join Date: Nov 2003
Location: Gardnerville, NV.
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tomulrich
Going to a twin turbo setup in C5 vette. Research says I need to change heads and pistons and multiple other parts. All parts have 20 miles on them.
Let me know if anyone is interested....make me an offer......
Here is what I PAID for things.
AFR cnc'd by ET Heads 3600.00 (+250.00 for port matching) flowing 347cfm@.650, 66cc chambers. VERY nice pieces
Jesel Mohawk 1.8 adjustable rockers 1200.00
FAST 90mm Intake 850.00
Kooks 1 7/8 SS headers 875.00
Kooks 3" X-pipe 300.00
Diamond custom pistons 835.00
Darton block: new GM 2004 3,130.00
Callies Magnum 4" crank 1,825.00
LS 6 / SLP billet oilpump and timing chain 339.00
Halltech intake and ram air tunnel 600.00
ASP underdrive pulley/balancer 250.00
ATI underdrive pulley/balancer keyed 480.00
FMS hydraulic custom cam 250/257 .660/.680 113 399.00
Lifters 165.00
40lb Accel injectors 419.00
Evans high flow water pump for evans cooling 469.00
Hypertech thermostat 70.00
Jesel push rods 160.00
Extra Trend 7.250 push rods NEW 100.00
New Cometic MLS head gasket made for Darton sleeved block 167.00 per set...have two sets...one unused.
Also have.......
stock long block with original 39,000 miles (mint)...asking 2000.00 obo
C5 corvette torque tube assembly (39,000 miles) mint. Bought a new on from GM at the recommendation of forum menbers..come to find out the only upgarde is the diameter of the driveshaft...bolts are still 10mm. Unit is for automatic. GM will not take return...asking 500.00. New 1200.00
Corvette radiator...asking 100.00
GM starter: asking 150.00
stock headers ...asking 100.00
1998 chrome rims...asking 400.00 for set
Stock GM water pump asking 150.00
Stock injectors asking 150.00
all used parts with 39,000 miles and mint.
Just listing a bunch of parts. It may be easier to sell some items as assemblies..like short block or heads or long block or entire engine.
Sure wish I knew I wanted a turbo setup before I built this setup. All parts have 20 miles on them(if that).
Let me know if anyone is interested....above prices dont include the tax I paid...
I have receipts and spec / flow sheets for everything.
PLEASE EMAIL ME ...... tmo26@aol.com
Tom Ulrich
Let me know if anyone is interested....make me an offer......
Here is what I PAID for things.
AFR cnc'd by ET Heads 3600.00 (+250.00 for port matching) flowing 347cfm@.650, 66cc chambers. VERY nice pieces
Jesel Mohawk 1.8 adjustable rockers 1200.00
FAST 90mm Intake 850.00
Kooks 1 7/8 SS headers 875.00
Kooks 3" X-pipe 300.00
Diamond custom pistons 835.00
Darton block: new GM 2004 3,130.00
Callies Magnum 4" crank 1,825.00
LS 6 / SLP billet oilpump and timing chain 339.00
Halltech intake and ram air tunnel 600.00
ASP underdrive pulley/balancer 250.00
ATI underdrive pulley/balancer keyed 480.00
FMS hydraulic custom cam 250/257 .660/.680 113 399.00
Lifters 165.00
40lb Accel injectors 419.00
Evans high flow water pump for evans cooling 469.00
Hypertech thermostat 70.00
Jesel push rods 160.00
Extra Trend 7.250 push rods NEW 100.00
New Cometic MLS head gasket made for Darton sleeved block 167.00 per set...have two sets...one unused.
Also have.......
stock long block with original 39,000 miles (mint)...asking 2000.00 obo
C5 corvette torque tube assembly (39,000 miles) mint. Bought a new on from GM at the recommendation of forum menbers..come to find out the only upgarde is the diameter of the driveshaft...bolts are still 10mm. Unit is for automatic. GM will not take return...asking 500.00. New 1200.00
Corvette radiator...asking 100.00
GM starter: asking 150.00
stock headers ...asking 100.00
1998 chrome rims...asking 400.00 for set
Stock GM water pump asking 150.00
Stock injectors asking 150.00
all used parts with 39,000 miles and mint.
Just listing a bunch of parts. It may be easier to sell some items as assemblies..like short block or heads or long block or entire engine.
Sure wish I knew I wanted a turbo setup before I built this setup. All parts have 20 miles on them(if that).
Let me know if anyone is interested....above prices dont include the tax I paid...
I have receipts and spec / flow sheets for everything.
PLEASE EMAIL ME ...... tmo26@aol.com
Tom Ulrich
The saying, "More money than sense" comes to mind. 20 miles!!!
Last edited by ssheets; 03-18-2005 at 06:06 PM.
03-18-2005, 06:05 PM
#6
thanks LOWetz.......for reading!
MAKE OFFER........
I tried posting in the for sale section ...it said "not authorized"...I dont know what that is all about.
Oh please....if you dont have nice things to say please post elsewhere.
Thanks Tom
MAKE OFFER........
I tried posting in the for sale section ...it said "not authorized"...I dont know what that is all about.
Oh please....if you dont have nice things to say please post elsewhere.
Thanks Tom
03-18-2005, 10:27 PM
#7
TECH Regular
iTrader: (1)
Join Date: Nov 2002
Location: Howell Mi.
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
I'll Vouch for Tommy This stuff is brand new
I'll bet he hasn't even got it to the track yet
This is a stand up guy and no worries about buying from him.
You might be better off selling the car Tommy.
Dynamite set up
Buy a Z06 and install some twins
Rodney Crashed 94 is doing a single.
I'll bet he hasn't even got it to the track yet
This is a stand up guy and no worries about buying from him.
You might be better off selling the car Tommy.
Dynamite set up
Buy a Z06 and install some twins
Rodney Crashed 94 is doing a single.