Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

What's wrong?

Thread Tools
 
Search this Thread
 
Old 04-12-2005, 10:03 PM
  #1  
On The Tree
Thread Starter
iTrader: (2)
 
LS1mtZ's Avatar
 
Join Date: Feb 2002
Location: N. Ft. Myers
Posts: 106
Likes: 0
Received 0 Likes on 0 Posts

Default What's wrong?

I have a 2001 z28 6spd w/ 65k miles. It just recently started to shake and a slight dull bumping sound which only can be heard from inside.... really you don't hear anything just feel it. It has a rough kinda choppy idle. Cam heads all stock. It's only at idle that it seems weird, it drives fine once going. When you shut the car off, it has one bigger shake. Sometimes when under slight bog in 5th I will get a misfire light for #5 cylinder. I cleared it and it hasn't came on since but shaking at idle won't go away. Could it be a broken motor mount.. my shifter does seem to move around alot, bearing in the bottom going, blown cylinder.... where should I start what should I look for? I do hear an exhaust leak, could it make it that far off that it messed with tuning? I have a scanmaster if any data off that will help.
Old 04-13-2005, 03:33 AM
  #2  
Cal
TECH Veteran
iTrader: (1)
 
Cal's Avatar
 
Join Date: Feb 2003
Location: Northern Utah
Posts: 4,692
Likes: 0
Received 3 Likes on 3 Posts

Default

Start by changing the plugs. If that doesn't take care of it, do a compression test; that will tell you the condition of the rings and valves.
Old 04-13-2005, 06:30 AM
  #3  
Launching!
iTrader: (8)
 
T/A-Speedfreak's Avatar
 
Join Date: Nov 2002
Location: tx
Posts: 252
Likes: 0
Received 0 Likes on 0 Posts

Default

check your valve springs. I have had some break 3 different times. You have a six speed so it is more likely to happen. Good luck.
PS the first time I didn't know and the valve dropped on the way to the shop, instant 4 grand.




All times are GMT -5. The time now is 02:22 AM.