Help Me pick a cam for new motor.
#1
On The Tree
Thread Starter
iTrader: (5)
Join Date: Nov 2003
Location: S. Cali
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Help Me pick a cam for new motor.
Well Im going with a 389 for the time being. Let me say this I have had the 231 237, magic stick, 225 225, and have a lot of experiece with my friends G5X3. I love big cams. With that being said any suggestions as far as a bad *** cam to put in new motor. Heads are Stage 2 ported and polished LS6 heads, Manley 2.02/1.60 will have gold springs on them. Flow numbers are over 300 at 600 lift. Pistons have -4cc reliefs so I can go pretty big. Any recomendations??? I would love to try to go for 500 to the ground but don't know if im gonna make it.
#2
TECH Senior Member
IMO your heads will need upgrade to stage 3 (all bore motor)
Then forget of the shelf cams and once the heads are done and flowed, give those specs and get a custom cam especialy tailored to match your lift flows.
Then forget of the shelf cams and once the heads are done and flowed, give those specs and get a custom cam especialy tailored to match your lift flows.
#3
On The Tree
Thread Starter
iTrader: (5)
Join Date: Nov 2003
Location: S. Cali
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PREDATOR-Z
IMO your heads will need upgrade to stage 3 (all bore motor)
Then forget of the shelf cams and once the heads are done and flowed, give those specs and get a custom cam especialy tailored to match your lift flows.
Then forget of the shelf cams and once the heads are done and flowed, give those specs and get a custom cam especialy tailored to match your lift flows.