BoneSS

iTrader: (9)

Wondering who is running one? I am going to on a 112 due to the recommendation of Brent @TEA along w/ their 5.3 1.5 heads milled at 0.01. It is going to be coupled with a 4200/2.35 stall, 373's, Fast 90 Intake, NW TB, TSP 85 mm lid, SLP 85 mm MAF, Kooks 1 3/4 headers and Y Pipe, and the rest of the boltons in my sig. Just wondering what everyone thinks of the cam.

Beast96Z

iTrader: (21)

The 571/573 sound like the XE lobe, not the XE-R. The XE-R has .588/.592 valve lift.

lsx24

iTrader: (45)

Possibly. That would idle like the stock cam with cutouts, doesn't it???

BoneSS

iTrader: (9)

It says XR on the cam card.

my01camaroz28

iTrader: (15)

there are xr and xer lobes.

BoneSS

iTrader: (9)

It is just the extreme lobe, I misspoke.

BrentB@TEA

This cam has been one of the top performers with our heads on our dyno.

bigdsz

iTrader: (1)

That is a good cam but the lobes are XE not XER. See sig below. Neither the XE or the XER idle anything like stock.

sparky t/a

iTrader: (1)

not on a 112.