400rwhp Cam Only?
#1
400rwhp Cam Only?
I have a 98 Z28 with LS6 IM, Longtubes, ORY, cutout, Lid, free mods, etc etc. Im doing a cam soon, and i want to make 400 to the wheels.
Im going to do all the necessary compnents (hardened pushrods, springs, etc). I have talked to a few people who have put 400-415 down with the futral 230/232 and 232/234 cams. Anybody on here put down 400+ cam only with a similar cam? I had planned on the 232/234.... Tryin to get info so i can make sure i go big enough to get the power, while not stalling out at every stoplight.
Thanks in advance for the info.
Im going to do all the necessary compnents (hardened pushrods, springs, etc). I have talked to a few people who have put 400-415 down with the futral 230/232 and 232/234 cams. Anybody on here put down 400+ cam only with a similar cam? I had planned on the 232/234.... Tryin to get info so i can make sure i go big enough to get the power, while not stalling out at every stoplight.
Thanks in advance for the info.
#2
TECH Apprentice
Join Date: Jun 2004
Location: Houston,TX
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
I put down 395 SAE corrected through a 12 bolt, but my exhaust also hurt me. My cam was a 230/234 .591/.598 on a 113+2, and it didn't make power past 6200. Sweet thunder true duals sound great, but don't perform. 400rwhp would not be a problem with a cam that size assuming you're an M6. If you have problems with stalling out, then your tuner sucks.