Ferocity02

iTrader: (60)

Well the intake and the exhaust valve seals that came off my car are noticibly different, brown on the exhaust and black on the intake. The seals are different sizes and obviously different colors, but I got only brown seals with my springs... I am assuming I can use the brown ones for all the valves, but I just want to make sure. Thanks

Beast96Z

iTrader: (21)

They are all the same stem diameter. Pop them on and go.

Ferocity02

iTrader: (60)

And off I go!!!

HumpinSS

iTrader: (1)

The exhausts are higher temps and will work on the intake....

gmblack3

iTrader: (1)

I put all brown on mine.

Ferocity02

iTrader: (60)

I got four done... 16-4 to go!

I had some trouble with the air hose clearencing the header primary, took about an hour to fix. I will finish the install tomarrow and start the heat cycles

Richard@WCCH

iTrader: (3)

The brown seals are are the better quality seal (viton material). The black seals are a polyacrylic material. Brown = better.

Good luck,

Richard

SideStep

...same here

REDWS6ROCKET

iTrader: (4)

well you did better than me. i only got 13 seals.