Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Stealth cam owners......Need help!

Thread Tools
 
Search this Thread
 
Old 09-06-2005, 12:29 PM
  #1  
TECH Enthusiast
Thread Starter
iTrader: (104)
 
Pimpium57's Avatar
 
Join Date: Oct 2003
Location: Chicago
Posts: 543
Likes: 0
Received 2 Likes on 2 Posts

Default Stealth cam owners......Need help!

I've been considering a LPE GT2-3 cam for the longest time, but many of you suggested one of the MTI Stealth cams (or similar spec'ed cams). I know the Stealths would put out a bit more power, but my attraction to the GT2-3 was a DEAD stock idle. Does anyone have a Stealth cam w/ full exhaust AND a completely stock sounding idle?

Alotta guys say, "it's all in the tune".......and to go for a cheaTR or Stealth cam, but if it will be lopier than a GT2-3, then it's not for me.

Thanks!
Old 09-06-2005, 01:07 PM
  #2  
TECH Fanatic
iTrader: (16)
 
SLP4CamaroSS's Avatar
 
Join Date: Nov 2004
Location: Lawton, ok
Posts: 1,266
Likes: 0
Received 0 Likes on 0 Posts

Default

same here im in the same boat im looking at the gt2-3 cam but othere say go with the stealth or the cheatr
Old 09-06-2005, 01:09 PM
  #3  
Banned
iTrader: (19)
 
Bryan @ Speed Inc.'s Avatar
 
Join Date: Jun 2005
Location: chitown
Posts: 1,879
Likes: 0
Received 0 Likes on 0 Posts

Default

i have the MTI stealth 2. the cam makes good power........ and with a 700/750 rpm idle, it's got a very small beat to it.... 800 rpm idle sounds dead stock w/ full exhaust.
Old 09-06-2005, 01:14 PM
  #4  
TECH Fanatic
iTrader: (16)
 
SLP4CamaroSS's Avatar
 
Join Date: Nov 2004
Location: Lawton, ok
Posts: 1,266
Likes: 0
Received 0 Likes on 0 Posts

Default

have you dynoed yet how was your gain with that cam
Old 09-06-2005, 01:25 PM
  #5  
Banned
iTrader: (19)
 
Bryan @ Speed Inc.'s Avatar
 
Join Date: Jun 2005
Location: chitown
Posts: 1,879
Likes: 0
Received 0 Likes on 0 Posts

Default

well i put it in a big 402 stroker......... so no good comparisons. made 440+ rwhp w/ a fast 90/90 set up.
Old 09-06-2005, 01:25 PM
  #6  
Banned
iTrader: (19)
 
Bryan @ Speed Inc.'s Avatar
 
Join Date: Jun 2005
Location: chitown
Posts: 1,879
Likes: 0
Received 0 Likes on 0 Posts

Default

^^^ through a 6spd, steel flywheel, 12 bolt w/ 33 spline axles and a posi
Old 09-06-2005, 01:39 PM
  #7  
TECH Enthusiast
Thread Starter
iTrader: (104)
 
Pimpium57's Avatar
 
Join Date: Oct 2003
Location: Chicago
Posts: 543
Likes: 0
Received 2 Likes on 2 Posts

Default

The 402's gonna make a big diff. compared to a stock 346....
Old 09-06-2005, 02:43 PM
  #8  
TECH Senior Member
 
PREDATOR-Z's Avatar
 
Join Date: Mar 2004
Location: BFE
Posts: 14,620
Likes: 0
Received 16 Likes on 16 Posts

Default

Stealth II here, 434rwhp with PRC stage 2.5, 5.3L heads + boltons etc...
Old 09-06-2005, 03:57 PM
  #9  
Rob
TECH Fanatic
iTrader: (6)
 
Rob's Avatar
 
Join Date: Nov 2001
Location: Diamondhead, MS
Posts: 1,326
Received 5 Likes on 5 Posts

Default

The GT2-3 idles like bone stock even with stock tuning. Idles like stock after tuning...and made quite a bit more

The only Stealth II I've heard of was in a GTO and it loped. Worse when it was cold and then smoothed out to slightly noticeable.




All times are GMT -5. The time now is 05:27 AM.