Patriot 232/230 cam..Installed..w/video!!
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Patriot 232/230 cam..Installed..w/video!!
Well, all went well with my cam install this weekend.
I Started 8:30am on Saturday morning, worked till 4:00pm..then worked on it again Sunday from 9:00am till 1:00pm.
Took pics along the way as well. It went pretty smoothly. I installed the following:
Patriot cam 232/230 .580/.580 110lsa
Patriot "Gold" Dual Valve Spring kit (Comes with Titanium retainers, Super 7 Lock, machined bases, viton seals)
Comp Cams Chromemoly Pushrods
Idle is pretty choppy but I love it. Going to have a buddy of mine tune it tonight.
I didnt lose much low-end grunt at all. I expected to lose alot but its still damn peppy down low. Once it hits 3800-3900rpms it just rips and pulls HARD to 6k and still is pulling. We'll see how it does after we get rid of the 6k rev limiter and get it tweaked better.
To help out driveability I drilled the hole in the throttle body a little bigger. It now idles on its own just fine...runs pretty damn good for not being tuned. No surging or bucking.
I am extremely pleased with this cam. Thanks to Chris Straub for helping me out on all my questions.
Here is a link to the video of it idling.
http://www.rmgto.com/media/gtowithnewcam1.wmv
It sounds even meaner in person.
I Started 8:30am on Saturday morning, worked till 4:00pm..then worked on it again Sunday from 9:00am till 1:00pm.
Took pics along the way as well. It went pretty smoothly. I installed the following:
Patriot cam 232/230 .580/.580 110lsa
Patriot "Gold" Dual Valve Spring kit (Comes with Titanium retainers, Super 7 Lock, machined bases, viton seals)
Comp Cams Chromemoly Pushrods
Idle is pretty choppy but I love it. Going to have a buddy of mine tune it tonight.
I didnt lose much low-end grunt at all. I expected to lose alot but its still damn peppy down low. Once it hits 3800-3900rpms it just rips and pulls HARD to 6k and still is pulling. We'll see how it does after we get rid of the 6k rev limiter and get it tweaked better.
To help out driveability I drilled the hole in the throttle body a little bigger. It now idles on its own just fine...runs pretty damn good for not being tuned. No surging or bucking.
I am extremely pleased with this cam. Thanks to Chris Straub for helping me out on all my questions.
Here is a link to the video of it idling.
http://www.rmgto.com/media/gtowithnewcam1.wmv
It sounds even meaner in person.
#5
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Its quiet because I dont have longtubes on it yet. Stock exhaust other then magnaflow mufflers and 2.5" pipe from the mufflers to the tips.
Longtubes are coming soon. Its an M6
I didnt really find anyone that had used it before.
Longtubes are coming soon. Its an M6
I didnt really find anyone that had used it before.
Trending Topics
#11
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
pretty damn crisp...a buddy of mine threw it on hp tuners and fixed my fuel trims as best he could.....it now feels stronger throughout the whole range..better then stock all the way around. Little better down low and it feels like a shot of Nitrous when it hits 4000 and up.
#13
TECH Fanatic
iTrader: (1)
Originally Posted by TheZaZ
pretty damn crisp...a buddy of mine threw it on hp tuners and fixed my fuel trims as best he could.....it now feels stronger throughout the whole range..better then stock all the way around. Little better down low and it feels like a shot of Nitrous when it hits 4000 and up.
#19
TECH Enthusiast
iTrader: (3)
Join Date: Aug 2005
Location: Castle Rock, CO
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
I was the buddy that tried to help get him tuned. That reversion at low RPMS sends the trims all over the place, +10 to -10 and back again in the span of a few seconds in the same cell. We got it idle ok, but what other things can I do to limit bucking and such, or is he screwd because of a 110LSA and stock manifolds? I also think hes throwing misfire codes, is there something I can do about that as well?
Help 2 brothas out!
Edit - once we tuned it, I was surprised at how well it ran when cruising. It felt like stock, until you stomped on it, then it romped. People take note, even semi-agressive cams nowdays dont mean what they used too, a crappy around town car.
Help 2 brothas out!
Edit - once we tuned it, I was surprised at how well it ran when cruising. It felt like stock, until you stomped on it, then it romped. People take note, even semi-agressive cams nowdays dont mean what they used too, a crappy around town car.
#20
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Yea, the idle is kinda outta whack now...probably gonna make another trip over to steel's house and check it out...
Hmm...I would definetly be interested in those Harland rockers....might be a little while but that would be awesome!
Hmm...I would definetly be interested in those Harland rockers....might be a little while but that would be awesome!