rjw

iTrader: (3)

I'm looking for a good set of heads for an LS1 with blower.

I've been following all the progress on just about everyone's heads, but I need a good set NOW

Anyone have a set in stock?

Bryan @ Speed Inc.

iTrader: (19)

what were you looking at??? AFR's? ET's heads?

777

iTrader: (21)

Man there is all kinds of heads in stock. What are you looking for. Just start asking sponsors.

rjw

iTrader: (3)

Point me if you would


Here is who I've contacted and lead times are 3 to 4 weeks or more.

ETP. Dart, TEA, Cartek, W2W and a few others

I need something in a 225 cc range quickly

SideStep

AFR 225cc heads come with a 72cc chamber... will that work for you? They also have a thicker deck to prevent flexing or lifting under big boost situations... they are available now.

Check this thread out
https://ls1tech.com/forums/dynamometer-results-comparisons/410909-408-w-et-225s-f1-procharger-dyno.html

rjw

iTrader: (3)

From who?

SideStep

www.airflowresearch.com

Several of our vendors sale them... or you can buy direct...

Beast96Z

iTrader: (21)

If you want heads now, get the AFR's. BTW, 3-4 weeks isn't a bad lead time on the ET heads for the power they are making. Just depends on how you feel about leaving a few HP on the table.

rjw

iTrader: (3)

I've called around and everyone is out of AFR's and ETP's at the moment.

IF any of the vendors has a set of 225's in stock, please let me know

Thanks

777

iTrader: (21)

check ls1speed.com, futralmotorsports.com, thunderracing.com, byunspeed.com (could have them, not positive though) Those are the three main vendors I would buy from. Make sure you call AFR as well if you haven't already.

hardtop ss

iTrader: (10)

How much thicker is the deck on afrs compaired to etp.

Brian Tooley Racing

iTrader: (13)

I don't know who would have told you a 3-4 week lead time from here. We have some bare (unported) AFR castings on the shelf that we could cut and ship in about a week. We have a 225 cc port and a 238 cc port, the big port has made over 1500 HP for W2W. Let me know

MagikMan

iTrader: (2)

I'd look into Cartek...... www.cartek.net

Tony Mamo @ AFR

iTrader: (13)

Call me directly at AFR on Monday...

Not sure why you wouldn't have done that sooner but I might be able to point you in the right direction. I know a few dealers that might still have a set on the shelf.

(818)890-0616 Ext. 109

Tony M.

Ed Curtis

Wow... working on Sunday? What's up with that?



Ed

GrannySShifting

iTrader: (10)

@ .050 Very nice constructed heads, never seen a nicer set. We have a few now because of that