Head Gasket Opinion Please
12-23-2005, 09:47 PM
#3
TECH Resident
Join Date: Jun 2004
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
This one
http://www.scegaskets.com/products/ics.html
http://www.scegaskets.com/news/ics-t...horsepower.htm
http://www.scegaskets.com/products/ics.html
http://www.scegaskets.com/news/ics-t...horsepower.htm
The ICS Titan head gasket was installed without sealants, o-rings or
receiver grooves. Pressure transducers were mounted at the gasket and data sampling occurred at a rate of 120 times per second to confirm that there were no coolant or combustion leaks at any point in the tests.
A closer look at the numbers shows that the new ICS Titan head gasket sealed over 6.4 hp/cubic inch at an estimated 3300 psi cylinder pressure. We were as pleased with the performance of the new head gasket as we were impressed with the colossal horsepower of Kenny's "little" engine.
receiver grooves. Pressure transducers were mounted at the gasket and data sampling occurred at a rate of 120 times per second to confirm that there were no coolant or combustion leaks at any point in the tests.
A closer look at the numbers shows that the new ICS Titan head gasket sealed over 6.4 hp/cubic inch at an estimated 3300 psi cylinder pressure. We were as pleased with the performance of the new head gasket as we were impressed with the colossal horsepower of Kenny's "little" engine.
12-26-2005, 12:14 AM
#5
TECH Resident
Join Date: Jun 2004
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts