What cam w/ MTI S2R heads milled .030?
01-08-2006, 01:15 PM
#1
On The Tree
Thread Starter
iTrader: (39)
Join Date: Apr 2002
Location: Weatherford TX
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
What cam w/ MTI S2R heads milled .030? Guys, I have done some searching on not really found the results I was looking for, so here goes. What cams are you guys running with these heads (or any milled heads) without P/V clearance problems. I was looking at the TR230, but I really don't want to pull the heads to clay it. This is not my daily driver, so really anything goes!
I dynoed 390 rwhp/381 tq with 226/226 .569/.569 114 comp cam, these heads, and Hooker LT's/ORY (no bolt ons, no tuning). I bought this cam because I was planning on adding a procharger, but it looks like that will have to wait a while, so I wanted to try to squeeze a little more power out of it N/A. I plan on adding a Pulley, fast 90/90, 85mm maf, TSP lid and some tuning soon.
TIA
Ezra
I dynoed 390 rwhp/381 tq with 226/226 .569/.569 114 comp cam, these heads, and Hooker LT's/ORY (no bolt ons, no tuning). I bought this cam because I was planning on adding a procharger, but it looks like that will have to wait a while, so I wanted to try to squeeze a little more power out of it N/A. I plan on adding a Pulley, fast 90/90, 85mm maf, TSP lid and some tuning soon.
TIA
Ezra
01-08-2006, 05:54 PM
#5
!LS1 11 Second Club
Give Futral a call on Monday and ask them if they think the F9 will have any problems with PTV. It's a decent step up larger than your cam, and it will accommodate any future blower application.