ET 215's. Help calculating my compression
#1
On The Tree
Thread Starter
Join Date: Mar 2005
Location: Kansas City Area
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
ET 215's. Help calculating my compression
Hey guys, need some help. There have been no mill to the heads yet. I have .075 out of the hole using .045 cometics. I verified my clearance and I have alot on the intake and about .192 on the exhaust. What would my current CR be? If needed, how much could I mill and be safe without fly cutting. The cam is a monster and I can't believe I have this much clearance available. Thanks in advance!
#3
On The Tree
Thread Starter
Join Date: Mar 2005
Location: Kansas City Area
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
What cc are the heads?
62cc
What is the bore of your gasket?
3.90 (stock bore)
Do you mean your pistons are out of hole .0075?
Yes
Do you have any valve reliefs?
No
62cc
What is the bore of your gasket?
3.90 (stock bore)
Do you mean your pistons are out of hole .0075?
Yes
Do you have any valve reliefs?
No
#4
10 Second Club
iTrader: (5)
Join Date: Nov 2003
Location: Ft. Lauderdale, FL
Posts: 1,649
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ceo44
What cc are the heads?
62cc
What is the bore of your gasket?
3.90 (stock bore)
Do you mean your pistons are out of hole .0075?
Yes
Do you have any valve reliefs?
No
62cc
What is the bore of your gasket?
3.90 (stock bore)
Do you mean your pistons are out of hole .0075?
Yes
Do you have any valve reliefs?
No
Bob