Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

specs for '02 Z06 LS6 cam?

Old 04-05-2006, 10:57 PM
  #1  
Staging Lane
Thread Starter
iTrader: (11)
 
98formulaMAH's Avatar
 
Join Date: Jan 2005
Location: Virginia Beach
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts

Default specs for '02 Z06 LS6 cam?

I need to know the specs for the 2002 Z06 LS6 camshaft? thanks

I believe that it is more aggressive than the regular LS6.
Old 04-05-2006, 11:07 PM
  #2  
11 Second Club
iTrader: (9)
 
kenp's Avatar
 
Join Date: Nov 2004
Location: Cincinnati Area
Posts: 795
Likes: 0
Received 1 Like on 1 Post

Default

lift - .551 ex .555 int

duration 218 ex/204 int

LAS 117.5

Timing 115/120
Old 04-05-2006, 11:26 PM
  #3  
Staging Lane
Thread Starter
iTrader: (11)
 
98formulaMAH's Avatar
 
Join Date: Jan 2005
Location: Virginia Beach
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts

Default

will i need to get my PCM reprogrammed after this cam install
Old 04-11-2006, 07:41 PM
  #4  
11 Second Club
iTrader: (9)
 
kenp's Avatar
 
Join Date: Nov 2004
Location: Cincinnati Area
Posts: 795
Likes: 0
Received 1 Like on 1 Post

Default

You will not have to but it's always best to check and adjust the A/F ratios after a modification like a new cam. Ignition timing might be a slight issue also.
Old 04-11-2006, 08:18 PM
  #5  
Teching In
 
toecutter_tx's Avatar
 
Join Date: Apr 2005
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default

I have had this cam installed on my 98 for about 6 months and did not get a tune. The car seems to run fine.
Quite frankly I was expecting a bigger gain from a cam swap.
I have no changes the rev limiter so maybe Im leaving some power on the table.
Quite frankly I would pass on this mod or go bigger if I could do it again.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:05 PM.