specs on the torquer v3??
08-17-2006, 03:10 PM
#4
Launching!
iTrader: (22)
Join Date: Dec 2003
Location: Houston, Texas
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DanZ28
The MS3 is 237/242, .603"/.609" . Not sure if thats considered the Torqer cam or not though. The one you listed might be it.
08-17-2006, 05:07 PM
#6
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
King SS had it right 
.
Heres a quote I found using the "Search Button"!
Hey guys, just thought I would drop in and give a little info on the Torquer v3 camshaft. Specs on the camshaft are 231/234, .643"/.598" on a 110,111, or 112 LSA with 1* of advance ground in.
We are heading in the same direction with the T3 as we are the MS4. We went with a more aggressive intake for better power and tightened up the LSA for a more useable powerband and better DCR. We are wanting more power everywhere with this cam.
Dan
.Heres a quote I found using the "Search Button"!
Hey guys, just thought I would drop in and give a little info on the Torquer v3 camshaft.
Specs on the camshaft are 231/234, .643"/.598" on a 110,111, or 112 LSA with 1* of advance ground in. We are heading in the same direction with the T3 as we are the MS4. We went with a more aggressive intake for better power and tightened up the LSA for a more useable powerband and better DCR. We are wanting more power everywhere with this cam.
Dan
Trending Topics
08-18-2006, 03:20 PM
#9
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by camscam02
thnaks guys for clearing it up and i tried the " search button" and nothing came up! i have decided im going with the MS3 so i will post up when i get her in!
. 
08-19-2006, 12:00 AM
#13
Launching!
Join Date: Mar 2002
Location: nowhere in particular
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fratsit
I bought one and its on its way now. I will post up the cam card if you want to see it.
R/
Frat
R/
Frat
08-19-2006, 12:18 AM
#14
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by camscam02
lol for sure i should have it in by the nor cal event if your goin!
08-19-2006, 06:38 AM
#15
TECH Resident
iTrader: (1)
Join Date: Dec 2004
Location: Brookings, South Dakota
Posts: 927
Received 0 Likes
on
0 Posts
Originally Posted by tbojbob
Don't expect to much on the cam card, the one I got from them didn't even come w/a card, ended up sending the cam to Thunder and having them Cam Pro measure it. Now that's some information!!!
Getting my Torquer 3 has been an endeavor to say the least. They had it drop shipped from Comp and sent it to the wrong guy...in a different state....
I am being patient, but I will admit I am upset. How hard would it have been to spend an extra 30 seconds in the "attention to detail" department?
Talked to Jon Thurday and he assured me as is well, so I am sure it is. I still give there customer service a thumbs up.
R/
Frat
