spf8298

Hey guys,

I'm getting ready to do a cam install on my '99 vette and I was just wondering what length of pushrods some of you went with when you used the G5X2 camshaft? I know I've had several people tell me to use a pushrod length checker, but if some of you have already done this same setup, i'll just mimick what you've done. BTW, I'm running my stock heads right now. Chime in if any of you have any suggestions. Thanks.

shaun

orangeapeel

iTrader: (18)

With stock heads you can use the 7.400 stock length. I am not sure if the basecircle is different than stock on the G5X's but a longer pushrod might quiet it down some as far as valvetrain noises. 7.425.