Head Studs
#2
#5
10 Second Club
iTrader: (14)
Join Date: Jul 2005
Location: Indy
Posts: 2,520
Likes: 0
Received 0 Likes
on
0 Posts
yeah, i just got my studs and it says to run them down hand tight (to the bottom as it says on the site) and then to torque the nuts to a set ammount... im not sure what that ammount is though, probably the same as he said on that site
Trending Topics
#8
recieved an email back from ARP this is what im told just for future reference if anyone does a search.
"HELLO CHRIS
ON THE LS1 THE STUDS GO IN THE BLOCK HAND TIGHT ONLY 1 TO 2 FT LBS THEN
WITH THE ARP MOLY LUBE ON THE THREADS AND WASHER TORQUE THE 11MM STUDS
TO 70 FT LBS AND THE 8MM STUDS TO 23 FT LBS WITH MOLY AND the tq
sequence is THE SAME AS FACTORY
THANK YOU
RON F"
"HELLO CHRIS
ON THE LS1 THE STUDS GO IN THE BLOCK HAND TIGHT ONLY 1 TO 2 FT LBS THEN
WITH THE ARP MOLY LUBE ON THE THREADS AND WASHER TORQUE THE 11MM STUDS
TO 70 FT LBS AND THE 8MM STUDS TO 23 FT LBS WITH MOLY AND the tq
sequence is THE SAME AS FACTORY
THANK YOU
RON F"