Another Dumb Novice Question
09-20-2006, 07:32 PM
#1
Teching In
Thread Starter
Join Date: Sep 2006
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Another Dumb Novice Question Will the kits to rebuild a 350 chevy work in a ls1 motor? I am going to go all forged and I was checking out prices. Also, where is the best/cheapest place to get a good forged rotating assembly and where is a good place to buy ls1 cams? Thanks, Robert
09-20-2006, 09:27 PM
#5
Teching In
Thread Starter
Join Date: Sep 2006
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
ive looked at them but havent really had any luck finding what I am looking for besides the heads. Where can I find a good cam, around a 244 or so? And where can I find a good forged rotating assembly. Orangeapeel, i take it that the smc wont fit then?
09-21-2006, 06:56 AM
#7
Teching In
Thread Starter
Join Date: Sep 2006
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
85%, lol. Street, but I want a very mean street. I found a all forged kit for 2000 for a sbc and I was going to use that if it would fit. How do you know if it will fit? Thanks, Robert
Trending Topics
09-21-2006, 07:17 AM
#8
Well it won't fit. It is an LS1, not small-block chevy. 
Allthough the LS1 is a small block the parts are not interchangeable. Only with another LSx style engine.
Check Thunder Racing, TSP, SDPC and Speed.inc for LS1 rotating assembly parts. They should be able to iron out what you need.
Allthough the LS1 is a small block the parts are not interchangeable. Only with another LSx style engine.Check Thunder Racing, TSP, SDPC and Speed.inc for LS1 rotating assembly parts. They should be able to iron out what you need.