Stock SBC Pistons?
10-19-2006, 04:52 PM
#1
Staging Lane
Thread Starter
Join Date: Jan 2005
Location: Chicago, Illinois
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Stock SBC Pistons? Hey Guys,
I was curious if their is a difference from LS1 Pistons and standard SBC pistons assuming that Compression Height, Wrist Pin Size, Ring Size, Bore Size and such are all the same? I have friends at a shop that have set of pistons with the following specs;
4.030" Bore
1.250 Pin Height
Ring Sizes
1/16-1/16-3/16
It says they are for 6.0 Rods and 3.48/3.5 Stroke
Could these be used on bored Iron Block with a 6.125 Rod and a 4.0 Stroke?
Thanks in advance everyone!
I was curious if their is a difference from LS1 Pistons and standard SBC pistons assuming that Compression Height, Wrist Pin Size, Ring Size, Bore Size and such are all the same? I have friends at a shop that have set of pistons with the following specs;
4.030" Bore
1.250 Pin Height
Ring Sizes
1/16-1/16-3/16
It says they are for 6.0 Rods and 3.48/3.5 Stroke
Could these be used on bored Iron Block with a 6.125 Rod and a 4.0 Stroke?
Thanks in advance everyone!
