need some help. think i may have bent a valve or 3
#1
FormerVendor
Thread Starter
iTrader: (2)
Join Date: Dec 2004
Location: memphis, tn
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
need some help. think i may have bent a valve or 3
well i got my motor running last night and took it out for a drive. about 2-3min into the drive it started poping back through the exhaust durring acceleration. i thought my tune was way off. so we started messing with the tune. short and long tern fuel trims on bank 1 just kept asking for more and more fuel. pulled the plugs and they are all getting fuel and spark. they are black but not wet.
i guess my main guestion is about ptv clearance with my heads and cam. i have afr 225cc small bore 65cc heads with a afr 224/228 581/588 on a 114. all on a stock bottom end. think i might have some clearance problems?
i guess my main guestion is about ptv clearance with my heads and cam. i have afr 225cc small bore 65cc heads with a afr 224/228 581/588 on a 114. all on a stock bottom end. think i might have some clearance problems?