What are the cubic inches of a 6.0 L motor - LS1TECH

 Generation III Internal Engine 1997-2006 LS1 | LS6 Sponsored by:

What are the cubic inches of a 6.0 L motor

 11-20-2001, 09:01 PM #1 Teching In Thread Starter   Join Date: Nov 2001 Location: Terrell TX Posts: 27 What are the cubic inches of a 6.0 L motor I am getting back to my new motor build up again and I had this question to ask. I am going to bore the block 30 over and wondered what the final cubes would be.. Thanks BPP
 11-20-2001, 09:22 PM #2 Southern Fried Director   Join Date: Nov 2001 Location: Nawf Carolina Posts: 2,556 Re: What are the cubic inches of a 6.0 L motor 369.8 cubic inches J.
 11-21-2001, 09:13 AM #3 Corvette & Mustang Moderator iTrader: (3)   Join Date: Nov 2001 Location: Sugar Land, TX Posts: 2,416 Re: What are the cubic inches of a 6.0 L motor 6 liters converts to 366.12 cubic inches assuming the engine is exactly 6 liters.
 11-21-2001, 09:30 AM #4 SSU Moderator     Join Date: Nov 2001 Location: Allen, TX Posts: 4,858 Re: What are the cubic inches of a 6.0 L motor 6.0L + .030 = 370 6.0L + .060 = 375
 11-21-2001, 09:35 AM #5 TECH Regular   Join Date: Nov 2001 Location: Tullahoma TN Posts: 450 Re: What are the cubic inches of a 6.0 L motor [quote]Originally posted by Larry: 6 liters converts to 366.12 cubic inches assuming the engine is exactly 6 liters.
Larry, the GM 6.0 liter engine (4.0"Bx3.62"S) comes out to 364 cid stock. With .030" overbore it is 369-370 cid. [ November 21, 2001: Message edited by: 2quick4u ]

 01-16-2013, 08:59 PM #6 Teching In   Join Date: Jun 2012 Location: San Leon, Texas Posts: 11 366.142 cubic inches is exactly Six Litres.
 01-16-2013, 09:06 PM #7 LS1Tech Platinum Sponsor   Join Date: Jun 2011 Posts: 890 Bored .030 over this stock stroke setup would be considered a 370.
 01-16-2013, 09:49 PM #8 Grumpy Bastard     Join Date: Nov 2004 Location: Tampa FL Posts: 716 4 x 4 x 3.622 x .7854 x 8 = 364.124006 That's for the stock 6.0. The formula is Bore x Bore x Stroke x .7854 (Factor for PI Diameter) and that gives you the volume for 1 cylinder. Then multiply by 8 since that is the number of cylinders for the total displacement. Remember there is some rounding off for nomenclature since the numbers don't always come out even. But when converted from standard to metric it works out to about 6 liters.
 01-17-2013, 03:02 AM #9 12 Second Club iTrader: (49)     Join Date: Sep 2005 Location: Chillicothe/Lima, Ohio Posts: 8,137 Holy Christ people. You dug up an 11 year old thread to argue about engine size?
01-17-2013, 03:37 AM   #10
Grumpy Bastard

Join Date: Nov 2004
Location: Tampa FL
Posts: 716

Quote:
 Originally Posted by bww3588 Holy Christ people. You dug up an 11 year old thread to argue about engine size?
Yeah we did. You wanna make something of it Pal?

I didn't notice to be honest I just thought I would share the formula for figuring displacement.

 01-17-2013, 05:03 AM #11 12 Second Club iTrader: (49)     Join Date: Sep 2005 Location: Chillicothe/Lima, Ohio Posts: 8,137 Yes...let's. Right now. Interweb beat down!
01-17-2013, 06:35 AM   #12
Grumpy Bastard

Join Date: Nov 2004
Location: Tampa FL
Posts: 716

Quote:
 Originally Posted by bww3588 Yes...let's. Right now. Interweb beat down!

LS1Tech celebrity death match style.

 01-17-2013, 09:02 AM #13 Custom User Title iTrader: (21)     Join Date: Oct 2003 Location: Houston , Tx Posts: 3,419 You've got the right to:

 Related Topics Thread Thread Starter Forum Replies Last Post ND4SPD Appearance & Detailing 7 12-07-2002 07:37 PM Gev Appearance & Detailing 9 10-10-2002 12:43 AM Palm Beach Z Appearance & Detailing 9 06-21-2002 07:53 PM 2001CamaroGuy Appearance & Detailing 3 04-08-2002 01:20 AM ArcticZ Appearance & Detailing 3 01-14-2002 12:36 PM

 Tags 60, 60l, 6liters, ci, cid, conversion, cubic, cuin, engine, inch, inches, liter, liters, motor, motors