high CR good flowing heads
#1
TECH Resident
Thread Starter
iTrader: (3)
Join Date: Feb 2005
Location: detroit area
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
high CR good flowing heads
im in the market for a new set of heads.
i am currently running the original 241's that came with the car but with an older (5 year old) port job and bigger valves with stockish CR. i feel im leaving power on the table with these heads, i dynoed way under 400rwhp with these heads and an FM14 cam, coated LT's, 3" cat back, no cats, pulley, ewp, all bolt ons, and 90/90 intake tb setup.
i just added stainless QTP race headers with a 3" y-pipe and 4" cat back and now want heads with at least 11.1 cr but also want good flow #'s too.
what are my options in a head with enough flow and velocity but give me at least 11.1cr (or more as long as i could use 94 octane).
i am currently running the original 241's that came with the car but with an older (5 year old) port job and bigger valves with stockish CR. i feel im leaving power on the table with these heads, i dynoed way under 400rwhp with these heads and an FM14 cam, coated LT's, 3" cat back, no cats, pulley, ewp, all bolt ons, and 90/90 intake tb setup.
i just added stainless QTP race headers with a 3" y-pipe and 4" cat back and now want heads with at least 11.1 cr but also want good flow #'s too.
what are my options in a head with enough flow and velocity but give me at least 11.1cr (or more as long as i could use 94 octane).