Valve tip wear?
#1
Teching In
Thread Starter
Join Date: Nov 2004
Location: Austin, Texas
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Valve tip wear?
All,
I'm building my LS1 back up after a lifter/cam munch-fest. Any thoughts on the valve tip wear shown at the link below (see the last pics). It seems very minute to me....like maybe a few thousandths at most. The first few pics show the carnage that caused this crap. The heads probably have ~15-20K miles on them. Since I'm building up new again I'm curious as to whether I should replace the valves or leave them as is. I'll be getting them expected by my tuner as well but I figured I'd ask those that have been through the process of using used heads before.
Link Here
TIA!
I'm building my LS1 back up after a lifter/cam munch-fest. Any thoughts on the valve tip wear shown at the link below (see the last pics). It seems very minute to me....like maybe a few thousandths at most. The first few pics show the carnage that caused this crap. The heads probably have ~15-20K miles on them. Since I'm building up new again I'm curious as to whether I should replace the valves or leave them as is. I'll be getting them expected by my tuner as well but I figured I'd ask those that have been through the process of using used heads before.
Link Here
TIA!
Last edited by PewterC5-2000; 12-10-2006 at 05:03 PM.