GMPP ASA Cam
#101
Originally Posted by 35thUCF
well the hotcam and ASA apparently have smaller base circles than the stock cams, but people run them everyday without catastrophic failure and live with a little valvetrain noise, I can't hear my valvetrain over my open headers, so I think its fine
I was under the impression that the Hotcam has a stock base circle and did not require longer pushrods to compensate for it.
Andy1
#103
10 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: wisconsin
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bww3588
the ASA cam does not REQUIRE longer pushrods, but it is reccomended. it quiets the valve train down. so im guessing it has a smaller base circle. i do not know about the Hot Cam.
ls1 hotcam in my 6.0 engine and stock pushrods, lifter pre-load is the same as stock, no noise or ticking here
#105
12 Second Club
iTrader: (20)
Originally Posted by jay_lt4
ls1 hotcam in my 6.0 engine and stock pushrods, lifter pre-load is the same as stock, no noise or ticking here
https://ls1tech.com/forums/generation-iii-internal-engine/689791-calling-all-cam-experts-can-someone-help-me-id-these-cams.html