pushrod length for Stealth II, tr230, x1
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: Oct 2006
Location: muskegon MI
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
pushrod length for Stealth II, tr230, x1
i was going to run the stock ls6 pushrods, when i was going to run the ls6 cam.
now that i decided to go bigger i still have stock ls6 pushrods, but im not so sure how they are going to work.
i just bought some heads and are unsure of the combustion chamber size, but they are MMS stage 3 heads with 2.02/1.57 valves.
those are the 3 cams i've narrowed it down to, but im pretty sure on the x1 cam.
so i would like to know the length for that most importantly, than the tr230
i will be running stock size headgaskets, and once i find out the combustion chamber size, i will know if they have been milled or not, but im not sure!
thanks in advance!
now that i decided to go bigger i still have stock ls6 pushrods, but im not so sure how they are going to work.
i just bought some heads and are unsure of the combustion chamber size, but they are MMS stage 3 heads with 2.02/1.57 valves.
those are the 3 cams i've narrowed it down to, but im pretty sure on the x1 cam.
so i would like to know the length for that most importantly, than the tr230
i will be running stock size headgaskets, and once i find out the combustion chamber size, i will know if they have been milled or not, but im not sure!
thanks in advance!