LT1MAN

iTrader: (6)

friend of mine has a stock 02' z28 m6 and wants to do heads and cam. he is talking about doing the ls6 heads and cam, which i think he can get more power for less money by going aftermarket. i dont know jack diddly about who's heads are good for ls1's and i tried searching and found nothing conclusive. im looking for some suggestions, i know there is big power from heads and cam ls1's and i dont want my friend to waste a bunch of money, he said he can make 400crank hp with the ls6 kit, but i just know he can do better than that. he was also talking about doing a $3200 bolt on kit from summit until i smacked him
any help is greatly appreciated.

black01_WS6

iTrader: (13)

he can make over 400 with just a cam. I would tell him to get a cam in the 228-232 range or smaller with some TSP ls6 heads and he will make very good streetable power.

Have him look at the sponosors to the right, most of them have a heads and cam package that he can pick and choose.

What does he want from it- race it or DD it.

WS6TransAm01

iTrader: (13)

are you talking about unported LS6 heads and an LS6 cam?

Im making 508RW with CARTEK 4x ported LS6 heads and a custom cam.

LT1MAN

iTrader: (6)

i think with the stock ls6 (unported) heads and stock ls6 cam he said would make 400. it will be for a daily driver. he was also looking at some ported and polished ls6 heads that were not assembled for about the same price.

black01_WS6

iTrader: (13)

tell him to get some TSP ls6 or 5.3 heads, and go with a bigger cam.

With stock ls6 heads and cam he won't break 400.

have him look at a cheater cam.