Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Anyone with carbed ls1 exp.

Thread Tools
 
Search this Thread
 
Old 05-10-2007, 10:23 AM
  #1  
TECH Apprentice
Thread Starter
iTrader: (1)
 
Darracq's Avatar
 
Join Date: Sep 2006
Posts: 364
Likes: 0
Received 1 Like on 1 Post

Default Anyone with carbed ls1 exp.

I have a 2000 ls1 with victor jr intake, 750 holley vac, hooker 1 3/4 long tubes in a malibu wagon, 3000lbs with driver, i have ran a best of 12.22 @ 109 with a 1.72 60ft. I have 3600 stall 3.90 gears this comes out to 310 rwph seems low for long tubes, maybe the intake is killing it? timing is 32 drgrees from 1200 up
Old 05-11-2007, 12:26 PM
  #2  
LS1 Tech Administrator
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,244
Likes: 0
Received 31 Likes on 27 Posts

Default

Moved from Advanced Tech. More eyes in here.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
Old 05-14-2007, 08:38 PM
  #3  
TECH Apprentice
iTrader: (3)
 
TA2SLOW346's Avatar
 
Join Date: Sep 2002
Location: belleville IL
Posts: 347
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Darracq
I have a 2000 ls1 with victor jr intake, 750 holley vac, hooker 1 3/4 long tubes in a malibu wagon, 3000lbs with driver, i have ran a best of 12.22 @ 109 with a 1.72 60ft. I have 3600 stall 3.90 gears this comes out to 310 rwph seems low for long tubes, maybe the intake is killing it? timing is 32 drgrees from 1200 up
What trans? Where you shifting at? Stock internals? No underdrive pulley? If your stock internals id say the intake and and carb will really start to shine with a larger cam and set of heads.




All times are GMT -5. The time now is 03:41 AM.