quick cam question
#1
12 Second Club
Thread Starter
iTrader: (12)
Join Date: Mar 2007
Location: fruitport mi
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
quick cam question
hey guys i have a comp cam sitting here i can buy from a guy for really cheap its bran new but i cant find a rpm range on it or nothin i do have the part number and ive looked it up and got a link for the specs.. could someone please tell me what this cam is good for i.e. low end mid or high and also how much should it lope? and will i be able to use my stock springs? or maybe ls6 springs ive herd u can use sometimes and there really cheap compaired to others..? please let me know any info will be greatly appreciated
http://www.compcams.com/Technical/Se...er=54-412-1111
thanks guys
http://www.compcams.com/Technical/Se...er=54-412-1111
thanks guys
#2
12 Second Club
Thread Starter
iTrader: (12)
Join Date: Mar 2007
Location: fruitport mi
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
well for some reason my link isnt working so ill copy and past specs.. thanks
Camshaft Specification Table
Part Number 54-412-11
Engine 1997-Present General Motors
4.8ltr-6ltr
Gen III/LS1/LS2/LS6,
8cyl.
Grind Number LS1 XR265HR-14
Description
--------------------------------------------------------------------------------
Intake Exhaust
Valve Adjustment 0 0
Gross Valve Lift 0.522 0.529
Duration At 0.006 Tappet Lift 265 271
--------------------------------------------------------------------------------
Valve Timing At 0.006
Open Close
Intake 21 64
Exhaust 72 19
--------------------------------------------------------------------------------
These Specs Are For The Cam Installed At 112 Intake CL
Intake Exhaust
Duration At 0.05 212 218
Lobe Lift 0.307 0.311
Lobe Separation 114
--------------------------------------------------------------------------------
Recommended Valve Springs 941-16
Camshaft Specification Table
Part Number 54-412-11
Engine 1997-Present General Motors
4.8ltr-6ltr
Gen III/LS1/LS2/LS6,
8cyl.
Grind Number LS1 XR265HR-14
Description
--------------------------------------------------------------------------------
Intake Exhaust
Valve Adjustment 0 0
Gross Valve Lift 0.522 0.529
Duration At 0.006 Tappet Lift 265 271
--------------------------------------------------------------------------------
Valve Timing At 0.006
Open Close
Intake 21 64
Exhaust 72 19
--------------------------------------------------------------------------------
These Specs Are For The Cam Installed At 112 Intake CL
Intake Exhaust
Duration At 0.05 212 218
Lobe Lift 0.307 0.311
Lobe Separation 114
--------------------------------------------------------------------------------
Recommended Valve Springs 941-16
#6
12 Second Club
Thread Starter
iTrader: (12)
Join Date: Mar 2007
Location: fruitport mi
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
so do you guys think its worth me wasteing me time installing it for the summer? 'my motors comeing out this fall' and like i said i can get it really cheap like 100 or 150.. thanks