New here! Looking for info/setup suggestions...
#1
Teching In
Thread Starter
Join Date: Jun 2007
Location: Iraq - LA is home
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
New here! Looking for info/setup suggestions...
Whats up fellas... Ive recently completed my last mustang project and after doing so many mustangs Im looking to try a new route. Id like to pick up a 99-00 C5 Corvette and do a little head work/new heads, a cam, and a direct port 150 shot setup. I'd appreciate it if you guys could fill me in on some things required and specs... like fuel pump upgrade, injectors, clutch, transmission, rear end, etc. Ive been reading around trying to figure out what this new project will run me and put together a ballpark list of what I'll need. Im thinking after I buy the vette Ill tear the top end down, replace the cam, and work the heads. But please enlighten me on things I need to know.... Ive heard the pushrods and valve springs should be changed... what else? Thanks in advance... also does anyone have any direct port setup pics? I searched all over and the only ones I found wouldnt show up in the thread...
Dave
Dave