Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

dropping ls6 into camaro, have ?'s

Thread Tools
 
Search this Thread
 
Old 07-26-2007, 04:08 PM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
sstoz06's Avatar
 
Join Date: Jul 2006
Location: arlington,tx
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts

Default dropping ls6 into camaro, have ?'s

gmpp ls6 is sitting next to car. i already bought a ls6 intake, i was going to swap my tr224 with.563 and a 112 lsa in while its out. do i have to swap my springs and pushrods, or is the stockers ok??? is there anthing else i need on the swap besides a tune. ive got my stock injectors from 98 ls1 and pp tb. all info and comments would be appreciated
Old 07-26-2007, 05:25 PM
  #2  
LS1 Tech Administrator
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,244
Likes: 0
Received 31 Likes on 27 Posts

Default

Moved from advanced tech section.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
Old 07-26-2007, 11:30 PM
  #3  
Launching!
 
Red2000SS's Avatar
 
Join Date: Nov 2001
Location: Plano, TX
Posts: 246
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by sstoz06
gmpp ls6 is sitting next to car. i already bought a ls6 intake, i was going to swap my tr224 with.563 and a 112 lsa in while its out. do i have to swap my springs and pushrods, or is the stockers ok??? is there anthing else i need on the swap besides a tune. ive got my stock injectors from 98 ls1 and pp tb. all info and comments would be appreciated
You need better springs if you are going to put a tr224 into a stock LS6 engine.
Old 07-27-2007, 02:09 AM
  #4  
Launching!
iTrader: (10)
 
sedanman's Avatar
 
Join Date: Dec 2006
Location: Indy
Posts: 284
Likes: 0
Received 0 Likes on 0 Posts
Default

Yeah you have too much lift for a stock set of springs.
Old 07-27-2007, 12:19 PM
  #5  
TECH Enthusiast
iTrader: (29)
 
Evans752's Avatar
 
Join Date: Jan 2005
Location: Logan, West Virginia
Posts: 565
Likes: 0
Received 1 Like on 1 Post

Default

Put a set of Comp Cams 918 springs in it there up to the task. Good Luck




All times are GMT -5. The time now is 07:55 PM.