Hammer Cam VS. T1/B1 Cam
#1
Teching In
Thread Starter
Join Date: May 2003
Location: Houston, TX
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Hammer Cam VS. T1/B1 Cam
Cant decide if I want to get a Hammer cam or a T1/B1 cam. I've heard these two cams are the best bang for your buck. Does anyone currently own these cams and how did they do on the dyno and in the 1/4??
Im looking to buy a Hammer Camur 222/222 @ .050, 566/566 112 l/s and 108 i/c, or the T1/B1 Cam: Dur 221/221 @ .050, 558/558 (112 l/s and 108 i/c for the T1) (114 l/s and 112 i/c for the B1). Ive looked pretty hard trying to find out where I can order one of these cams... but I give up so does anyone know where I can find one???
Thx
Im looking to buy a Hammer Camur 222/222 @ .050, 566/566 112 l/s and 108 i/c, or the T1/B1 Cam: Dur 221/221 @ .050, 558/558 (112 l/s and 108 i/c for the T1) (114 l/s and 112 i/c for the B1). Ive looked pretty hard trying to find out where I can order one of these cams... but I give up so does anyone know where I can find one???
Thx
#3
10 Second Club
iTrader: (12)
Re: Hammer Cam VS. T1/B1 Cam
Running an old Lunati T1 here w/(almost)all the obligitory bolt ons....416/405 through a 12 bolt and slicks...11.70 @120 mph on a weak 60'. I feel like there's an 11.30 @ 122.xx in it with a good clutch/better 60'. I like this cam. Sounds good and puts up a respectable enough # w/tuning(for a baby cam).
I believe Thunder is still selling them........
I believe Thunder is still selling them........
#4
TECH Apprentice
Join Date: Feb 2002
Location: tega cay, SC
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hammer Cam VS. T1/B1 Cam
i have the T1 cam also. 7.80 1/8th mile, is about 12 even in the 1/4 mile. i have a 1.700 60ft on nittos...with slicks it'd pry be around 1.55 so that takes me to right about 11.70. its a great cam and lopes sounds really good.
#5
10 Second Club
iTrader: (1)
Re: Hammer Cam VS. T1/B1 Cam
i have the m.t.i c1 222/222 112 hammer. with heads and most of the boltons(no ported mass air,t-body,cut out and no ud pullies)i made 424.1hp 408tq.the cam idles great,i've had no serging at low rpm's and it pulls hard to my 6,800rpm red line.i've ran in the 11.7's lonching below 3,000rpm's.
#6
10 Second Club
iTrader: (11)
Join Date: Feb 2003
Location: Bridge City, TX
Posts: 1,437
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hammer Cam VS. T1/B1 Cam
ran times in sig. with lunati T1 which i bought used with 20000 miles on it. went up to TR224. car dynoed 340rwhp with the T1 but call hauled ***. great strret strip cam. Jason
#7
D(irecto)r Pepper
Join Date: Nov 2001
Location: Houston Raceway Park...in TEXAS.
Posts: 1,952
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hammer Cam VS. T1/B1 Cam
I used the Hammer from MTI to run 10.88@122 with my 98/A4
Call them (MTI)at 281 870 8787
The C1/Hammer is a killer street/strip cam. Email me if you have any specific questions about it.
Call them (MTI)at 281 870 8787
The C1/Hammer is a killer street/strip cam. Email me if you have any specific questions about it.