What Valve Springs to Use?
08-17-2007, 08:12 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: New Fairfield, Connecticut
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
What Valve Springs to Use? Hey Guys, I Recently broke a valvespring. My problem is that i am having problems getting the exact spec on the camshaft. I am told that the cam has .598 lift. It is quite aggressive. This is on a .30 over Iron block 408 with stage III Ported heads and fully built lower end. Car is making around 530RWHP and 510 RWTQ. I need to fix this ASAP so any suggestions as to what valve springs would be safe to install in this beast would be greatly appreciated. Also while doing this job i am replacing the valve seals, any assistance as to where i can pick those up from would also come in handy. thanks guys!
Trending Topics
08-18-2007, 11:35 AM
#8
On The Tree
Thread Starter
iTrader: (1)
Join Date: Apr 2004
Location: New Fairfield, Connecticut
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
I've decided to go with the PRC's, Almost everyone i know has them and has had no problems with at all. which is also nice cause they come with valve seals and i need to replace those aswell. Thanks for the help guys 
08-18-2007, 11:49 AM
#9
Originally Posted by MadMike
I've decided to go with the PRC's, Almost everyone i know has them and has had no problems with at all. which is also nice cause they come with valve seals and i need to replace those aswell. Thanks for the help guys
Bill
