Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Next Mod

Thread Tools
 
Search this Thread
 
Old 06-11-2003, 04:15 PM
  #1  
Teching In
Thread Starter
 
dtgTXz28's Avatar
 
Join Date: May 2003
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Next Mod

I have a 99 Z28, 6 speed with all the stock internals. The only mods I have are bolt-ons. Would you buy a cam or long tube headers first?
Old 06-11-2003, 04:25 PM
  #2  
TECH Senior Member
iTrader: (9)
 
NataSS Inc's Avatar
 
Join Date: Dec 2001
Location: Estero, FL
Posts: 5,395
Likes: 0
Received 1 Like on 1 Post

Default Re: Next Mod

Save and do them both at the same time. You will get better performance with the 2 together. Just my .02
Old 06-11-2003, 04:45 PM
  #3  
Launching!
 
1999_SS_M6's Avatar
 
Join Date: Apr 2003
Location: Cincinnati, Ohio
Posts: 272
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Next Mod

I sort of hate it when you post a "which one" thread and the answer you get back is "do both", however, in this case I really have to agree.

If I was certain that my next single mod would be either the cam or headers, I would go ahead and buy one, shelf it, then save a month or two for the other. I would definitely want to install those mods together.

Also, make sure it's a cam that's going to run well without tuning, otherwise you've got another $400 to budget, and that's another month or 2. The good news is, by then there will be snow on the ground and you'll have plenty of time for your tear down! lol
Old 06-11-2003, 07:34 PM
  #4  
Teching In
Thread Starter
 
dtgTXz28's Avatar
 
Join Date: May 2003
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Next Mod

Snow in Texas... not really but which one would be cheaper?




All times are GMT -5. The time now is 06:35 PM.