Eddie 70

iTrader: (3)

I am reading different information all over the net about what is the stock length pushrods. I am changing the cam in my conversion motor and want to upgrade the pushrods at the same time. What is the stock length on the stock pushrods?

Eddie 70

iTrader: (3)

I am installing a G5X2 in the motor and have stock ratio rocker arms and the heads and block are stock. Any recommendations on length for this?

PREDATOR-Z

7.400 or 7.425
I would go for the latter (Comp Cam) to keep things quieter

Phil'sC5vette

iTrader: (4)

Im not sure why, but im seeing guys screw up and they are going under 7.40 instead of over with 7.425

Eddie 70

iTrader: (3)

I would rather be quieter if possible. Thanks for the tip. I can see where guys get turned around on the length and go shorter. They see more lift and don't think that the lobe is taller and go shorter on the pushrod. When in actuality the base is what is cut shorter. Correct me if I am wrong on this but I think I am right.