valvetrain
#1
Launching!
Thread Starter
iTrader: (2)
Join Date: Sep 2007
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
valvetrain
where can i get some strong valvetrain parts(springs,vavles, rods, etc.) for a stock cam.. or zo6 cam
im goin to be doin a FI setup, im only shooting for around 480hp-510hp
so i want to stregthin up the vavletrian.
im goin to be doin a FI setup, im only shooting for around 480hp-510hp
so i want to stregthin up the vavletrian.
#2
10 Second Club
iTrader: (14)
Join Date: Dec 2005
Location: Central California
Posts: 1,392
Likes: 0
Received 0 Likes
on
0 Posts
hey there,
if your thinking about changing cams, you should also consider upgrading to a new oil pump, as well as an LS2 timing chain for cheap insurance.
i got most of my parts from these places:
http://www.thunderracing.com/catalog...=vehicle&vid=3
http://www.texas-speed.com/shop/listcatsM.asp?MID=1
and also, summit racing, but they are a non sponsor so i wont post a link
those should get you started!! good luck!
if your thinking about changing cams, you should also consider upgrading to a new oil pump, as well as an LS2 timing chain for cheap insurance.
i got most of my parts from these places:
http://www.thunderracing.com/catalog...=vehicle&vid=3
http://www.texas-speed.com/shop/listcatsM.asp?MID=1
and also, summit racing, but they are a non sponsor so i wont post a link
those should get you started!! good luck!
Last edited by RooRnZ28; 01-15-2008 at 05:48 PM.