dshag

iTrader: (1)

Okay my understanding is that the 2001 and newer come with an ls6 intake manifold and the 98-2000 come with a more agressive cam. Is this true and if it is would i make more power if i bought a stock 2000 and put a ls6 intake on? Im in the process of buying so im just curious...

pj4553

iTrader: (6)

i'm pretty shure that the 98-2000 have the same internals as the 01-02

flamingo-flaps

They do have a slightly bigger cam but i highly doubt you will be able to even tell a difference.

LebaneseShowoff

iTrader: (6)

Agreed, and only a few 01 LS1 F-cars had LS6 intake, all 02 LS1 F-cars had them. if you want a decent cam for really cheap, get the LS6 Cam. should be able to pick one up for about $70 on here.

ssheets

iTrader: (1)

http://www.smokemup.com/tech/ls1.php

RPM WS6

iTrader: (3)

Some bad info in this thread....

That is not correct. Every '01 and '02 LS1 car has the LS6 intake. All of them.

No, the '98 to '00 do indeed have a different cam. Plus some other minor internal differences from the '01+ cars.

dshag

iTrader: (1)

I was curious thanks. I dont want to open the engine up yet...dont have enough faith in myself so i was trying to figure out the best route to go...ill probly get a 01 or newer, it seems the better choice due to the upgraded clutcg parts and intake. I need to learn more or have someone do a h/c

SOMbitch

iTrader: (8)

If your going to mod I wouldn't worry about going 99 up because the differences are so minor. I have a 98 and love it but prolly would have stayed away from it had I known the rod bolts are a little weak. The computer is different too and can be a little tough to tune with aggressive mods but a good tuner still nail it. Good luck!!