JRracing

iTrader: (35)

I need to know if a stock oil pan clears just fine on 383 motors. Or on a modified stock pan?? The stock pan for the mustang has been cut back to clear the K member and steering rack. It's notched back about 5" and is only about 1 1/2" deep in the front of the pan back until it clears the K member then drops down to stock depth. And the pick up tube has about 3" added to it, to pick up the oil at the rear of the pan.

I'm wondering if this is going to clear the crank. I don't have the motor back from the machine shop yet and it's eating me up thinking about it lol.