Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Patriot gold springs min lift?

Thread Tools
 
Search this Thread
 
Old 03-06-2008, 04:55 PM
  #1  
On The Tree
Thread Starter
iTrader: (2)
 
sevenstarsfall's Avatar
 
Join Date: Jul 2007
Posts: 185
Likes: 0
Received 0 Likes on 0 Posts
Default Patriot gold springs min lift?

I know the golds have a max lift of .650 but was wondering if there was any reccomended min lift.

Im asking this because Ive been deciding on a cam but will probably swap it out a few times. Lowest ill go is the TR224 and ill probably never go any bigger than an F14.

Thx
Old 03-06-2008, 04:59 PM
  #2  
TECH Senior Member
iTrader: (42)
 
slt200mph's Avatar
 
Join Date: Jul 2003
Location: HOT'LANA, GAWJA
Posts: 7,067
Likes: 0
Received 7 Likes on 6 Posts

Default

They need to be installed at the correct height so that you have the proper pressure on the seat and at max lift. 1.77 is the correct installed height.
Old 03-06-2008, 06:12 PM
  #3  
TECH Apprentice
iTrader: (7)
 
kwiksilverz28's Avatar
 
Join Date: Jun 2006
Location: Deltona, FL
Posts: 369
Likes: 0
Received 0 Likes on 0 Posts

Default

They worked fine with my stock cam, and just as good with my new blower cam with .600ish lift....




All times are GMT -5. The time now is 01:46 AM.