Piston to Valve Clearance on a 370ci
#1
On The Tree
Thread Starter
iTrader: (11)
Join Date: Jan 2004
Location: Austin, TX
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Piston to Valve Clearance on a 370ci
I am going to put some patriot stage 3 heads with 2.08/1.60 valves on top of my LQ4 iron 370. My cam is .598/.601, I am running .05 MLS 6.0L gaskets, and i have the Weisco flat top pistons with -2cc valve pockets. My question is will I have any trouble running these heads if I milled them .025 to 60cc chambers instead of 64cc? TIA.
Bryan
Bryan
#2
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
I am going to put some patriot stage 3 heads with 2.08/1.60 valves on top of my LQ4 iron 370. My cam is .598/.601, I am running .05 MLS 6.0L gaskets, and i have the Weisco flat top pistons with -2cc valve pockets. My question is will I have any trouble running these heads if I milled them .025 to 60cc chambers instead of 64cc? TIA.
Bryan
Bryan