You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
Only way to get half inch is spacers. Most covers are about an inch taller to clear aftermarket rockers. The spacers we use have been pretty good use a factory gasket and have a head locator so they don't move. Other than that our covers are 2" tall and do coils in factory posission or we can shift the coils where needed.
Only way to get half inch is spacers. Most covers are about an inch taller to clear aftermarket rockers. The spacers we use have been pretty good use a factory gasket and have a head locator so they don't move. Other than that our covers are 2" tall and do coils in factory posission or we can shift the coils where needed.
1/2" taller LS7 valve covers 
